Magnetic filter is one of the main equipments that should be used in all kinds of hot water installations. Its main function is, to prevent the metal part coma in the inner wall of the steel pipe due to the abrasive effect of water, after some time, causing a loss of performance malfunction in certain equipment such as 2 3 way valves.
Thanks to its magnetic cartridges, it captures the entrained metal parts in the steel pipe and these are periodically drawn from the device and washed away easily. Then, the magnetic cartridges are re-ed into the device and can continue to work.
In the pressure resistant body there are water inlet and outlet. Water passes through the distance from the inlet to the outlet by rubbing the magnets attached to the top cover, during which the the iron particules remain attached to the magnets and does not involve in water.
Long-lasting magnetic cartridges (4-8 years depending on use) should be replaced when they start losing their efficiency. All parts except the special magnet are made of stainless steel. The magnetic cartridges produced by TIMFOG can easily be supplied feach model and reassembled.
It is possible to supply magnetic filters produced basically in 2 different types; with without pump groups.
Magnetic Filter consists of upper section, body and bottom section
Design can be made fupper section, body and lower section in requested dimensions. Accordingly, the number of magnets and body volume varies.