BURNERS AND CO2 SYSTEMS
BURNER
Burners that burn and heat the water in the hot water boiler using natural gas/LNG or diesel oil are at least as important as boilers. It is vital for the greenhouse plant that the burner is particularly high quality and works smoothly. The biggest problem encountered when using international burner brands is burner service. The inability of the services to be in the greenhouse on time, the delay of commissioning, or the inability to get service in the event of a malfunction are the problems that cause investors to lose their product or lose a significant portion of their efficiency.
With its technicians and engineers in its infrastructure, Timfog provides commissioning, supervision, and servicing services from Istanbul to worldwide through its foreign language- speaking staff. Therefore, the supervision services it offers are much more economical than the Netherlands or similar European countries.
Timfog is a company specialized in the design, manufacture, installation, and maintenance of equipment that provides excellent combustion quality thanks to the collaboration with international brands of burners.
With its CO2 and CO2-free burner control systems ranging from 1,000 kW to 15,000 kW, it provides reliable and timely service in greenhouses. In particular, the low NOx level in the burners and the high combustion efficiency distinguish the Timfog project and technical staff compared to other project companies. All burners used have international certificates and safety criteria.
CO2 SYSTEMS
CO2 units are used in greenhouses for central CO2 dosing. The flue gas emitted from the natural gas-fired boilers and CHP units are transported to the greenhouse area by the CO2 blower by lowering its temperature. The flue gas is then distributed into the greenhouse using U-PVC pipes through special calculations. A CO2 control panel is available to control the CO2 dosing system. If there are multiple fans, this can be controlled centrally from a single control panel.
In addition, other control parts such as a CO detector, a CO2 sensor, or an air damper can be connected to the control panel. The CO2 control panel can also communicate with the burner control panel. The switch panel has all the control and safety equipment. Furthermore, this panel is supplied in accordance with local safety regulations. The CO2 detector prevents harmful CO (carbon monoxide) from entering the greenhouse area.
The CO2 pressure distribution, which must be calculated considering the total surface area, is generally optimized by distribution through the CO2 blower installed in the boiler room. Therefore, the U-PVC pipes needed will vary in length and diameter. The diameter of the holes in the plastic nylon air ducts used for CO2 distribution also varies according to these calculations. For a correct calculation, it is important to know the plant type and the required dosage standard (a value usually expressed in cubic meters of gas per hectare). The Timfog project team guarantees the best possible dosing result with the CO2 pipeline calculation and projects.